Wind rated walk doors

3 x 7 Wind rated walk door

Your sub-frame walk door comes complete and ready to install!

Features include

  • This is a “FLORIDA WIND RATED TO 150 MPH” Door (Wind Rating to approximately 155 mph. + / – 70 psf)
  • 20 Gauge Galvanized Insulated Door Leaf on 3×7
  • 5 3/4 – 16 Gauge Galvanized Insulated Door Frame
  • 16 Gauge Galvanized Subframe (Framed Opening). Sized to Match Girt Depth.
  • Cylindrical Lever Lock – Grade 2 (USD26) Chrome Finish
  • (3) Ball-Bearing Hinges – 4 1/2″ x 4 1/2″ with a Non-Removable Pin
  • ADA Compliant * 5 3/4″ Aluminum Threshold
  • Door Bottom Sweep with Drip Channel * Weatherseal
  • Adjustable Full Aluminum Channel
  • 12 Gauge, Galvanized Adjustable Mounting Clips
  • All Fasteners and Anchors Included for Complete Installation
  • Door comes packed in heavy duty wood crating

Wind rated walk doors

4 x 7 Wind rated walk door

Your sub-frame walk door comes complete and ready to install!

Features include

  • This is a “FLORIDA WIND RATED TO 125 MPH” Door (Wind Rating to approximately 125 mph. + / – 50 psf)
  • 20 Gauge Galvanized Insulated Door Leaf on 3×7
  • 5 3/4 – 16 Gauge Galvanized Insulated Door Frame
  • 16 Gauge Galvanized Subframe (Framed Opening). Sized to Match Girt Depth.
  • Cylindrical Lever Lock – Grade 2 (USD26) Chrome Finish
  • (3) Ball-Bearing Hinges – 4 1/2″ x 4 1/2″ with a Non-Removable Pin
  • ADA Compliant * 5 3/4″ Aluminum Threshold
  • Door Bottom Sweep with Drip Channel * Weatherseal
  • Adjustable Full Aluminum Channel
  • 12 Gauge, Galvanized Adjustable Mounting Clips
  • All Fasteners and Anchors Included for Complete Installation
  • Door comes packed in heavy duty wood crating

Wind rated walk doors

6 x 7 Wind rated walk door

Your sub-frame walk door comes complete and ready to install!

Features include

  • This is a “FLORIDA WIND RATED TO 125 MPH” Door (Wind Rating to approximately 125 mph. + / – 50 psf)
  • 18 Gauge Galvanized Insulated Door Leaf on 3×7
  • 5 3/4 – 16 Gauge Galvanized Insulated Door Frame
  • 16 Gauge Galvanized Subframe (Framed Opening). Sized to Match Girt Depth.
  • Cylindrical Lever Lock – Grade 2 (USD26) Chrome Finish
  • (2) Surface Bolts (Top and Bottom) Attached to “Inactive” Leaf (26D Finish)
  • (6) Ball-Bearing Hinges – 4 1/2″ x 4 1/2″ with a Non-Removable Pin
  • ADA Compliant * 5 3/4″ Aluminum Threshold
  • Door Bottom Sweep with Drip Channel * Weatherseal
  • Adjustable Full Aluminum Channel
  • 12 Gauge, Galvanized Adjustable Mounting Clips
  • All Fasteners and Anchors Included for Complete Installation
  • Door comes packed in heavy duty wood crating

Add-on elements for wind rated walk doors

Wind rated walk doors

Dorma 7200 Series Closer – Grade 3 Standard Duty

Certification: Listed by U.L. and C.U.L. under their reinspection programs. Meets the requirements for UL10C and UBC 7.2 (1997) for positive pressure.

Specification: All standard duty closers shall be hydraulic surface applied rack and pinion closers. The closer has two independent valves to separately control sweep and latch closing speeds and provide constant speeds when temperatures change. Standard with backcheck to provide cushioning effect in opening.

Standard placement allows opening to 110°, closer allows maximum opening to 180°. When ordering, must specify degree of opening if other than to a maximum of 110°.

Finish: Sprayed aluminum (689)/AL

Warranty: 5 years


Wind rated walk doors

DORMA 9000 Series Heavy Duty Exit Devices -Outside keyed, powder coated aluminum finish

The heavy-duty cast chassis provides superior durability while the smooth reduced projection touchbar assembly minimizes catch hazards.

Certification: The DORMA 9000 Series is listed by U.L. and C.U.L. under their continuing reinspection programs and conforms to standard U.L. 10C and U.B.C. 7-2 (1997) positive pressure testing. The DORMA 9000 Series is BHMA certified to the requirements of ANSI A156.3 for grade 1 devices.

Specification: All heavy-duty exit devices shall be DORMA 9000 Series rim or mortise. All devices to have heavy-duty cast chassis. All device touchbar, rail, and cover assemblies shall be constructed of heavy gauge solid wrought materials for true color coated finishes. Non-labeled units to have hex-key dogging standard. Fire rated versions shall be available for labeled applications. All devices to have deadlocking latchbolts with ¾” throw where applicable.

Exit Device Sprayed Finish: Aluminum powder coated process for the touchbar, rail and rods

Sprayed Trim Finish: Aluminum powder coated process.

Cylinders: Yale or Schlage

Warranty: 5 years

Data and Features:

  • U.L. Listed for Labeled Doors (prefix F) Option
  • Door Height up to 8” Yes
  • Door Thickness 1-3/4” to 2-1/4” Yes
  • Hex Key Dogging (non-listed units only) Yes
  • Handed Mortise only

Wind rated walk doors

Door protection plate (Kick plate)

ANSI: Meets ANSI A156.6 J101 metal armor plate

Dimensions: 8” High x 34” Wide

Finish: US 32D

Material: 18 gauge aluminum


Wind rated walk doors

Stainless steel hinges

Set of two


Wind rated walk doors

Subjamb extension

For girt heights 7′ – 6″ to 10′ – 0″

Jamb girt extensions are required for metal walls where the girt height is over 7′ – 6″ for attachment.